-->

How to Install an Mp Two Way Withebird Motorcycle Alarm on a Yamaha All New Aerox Connected 155cc

Hello all my friends, I hope you are all healthy always, thank you for visiting our blog, hopefully our blog is useful for all of you.

On this occasion we will post an article entitled: How to Install an Mp Two Way Withebird Motorcycle Alarm on a Yamaha All New Aerox Connected 155cc



How to install this motor alarm was made based on the usual experience before when usually doing it. And the summary is to be followed on the blog www.rаjаalаrmmоtоr.соm may be useful for us all.

MOTOR ALARM CABLE LINE TO VEHICLE

The alarm RED cable is connected to the battery Pоѕіtіf. use a cable socket for accurate connection and use Fuѕе 15A to be more secure when there is a tight connection the cable will not burn. Just wait for the fuse only if there is a short circuit.

Black wire alarm connect to Negative Ak. or it can also be connected to a different frame of the motor connected to the negative one.

The ORANGE alarm cable is connected to the motorcycle's key contact outlet. which is located at the front.

BLUE CABLE alarm connect to RELAY. This means this new alarm cable cannot be connected to the motorcycle cable directly and it is necessary to add a relay.

The alarm gray cable is connected to the Cut Engine Cable which is used to turn off the engine when the alarm gets disturbed, such as if a key is broken or the vehicle feels a suspicious vibration.

The PINK alarm cable does not need to be used, this cable functions the same as the Alarm GRAY cable. If there is a motorcycle, the AC cable gray alarm and alarm cable will both be used regularly as usual.

YELLOW wire alarm connect to turn signal + motorcycle wire. you can connect on the turn + right or turn + turn, upside down is not a problem.

YELLOW wire alarm connect to turn signal + motorcycle wire. Can you connect to the right turn signal+.

YELLOW wire alarm connect to turn signal + motorcycle wire. Can you connect the turn signal + left.

HOW TO CONNECT THE ALARM CABLE TO THE MOTORCYCLE CABLE

PLACEMENT OF THE ALARM MODULE AGAINST YAMAHA MOTOR All New Aеrоx 155сс Connесtеd, it will be placed on the back of the right side. Please disassemble the vehicle body оvеr so that it can install the default module in such a place.

The RED cable for the alarm is connected to the terminal Pоѕіtf battery, to see the trunk you have to remove the trunk of the motorcycle, the location of the battery is right under the trunk.

The black wire alarm connects to the negative terminal of the battery, which is in the bottom section.

the ORANGE alarm cable is connected to the brown ignition output cable, you can also connect it to the brown cable which is on the starter bedik which is close to the battery (left side) under the trunk.

the YELLOW alarm cable connect to the right turn signal+ cable at the same time dark brown color and the YELLOW alarm cable is usually connected on a regular basis. The location of this turn signal cable is located behind the back as a bit backwards to the right.

The BLUE cable for the alarm is connected to the starter+ on the blue white stripe, the position of this white socket is in the headlight head area.

The PINK alarm cable does not need to be connected, we use the gray cable as a cut engine.

Alarm GRAY cable please add 1ea 12VDC 5 LEFT RELAY has NC contacts. This GRAY cable splice is to provide the additional relays to support the above to check the flow of the ALL through the sudden translucency of the new bridge. Please CLICK HERE to see how to build the RELAY.


HOW TO TEST ALARM

Do a test on the motorcycle without the alarm module by bypassing the alarm cable socket. Check all the start ignition functions of the front light buttons, lights, turn signals, stop lights, horn buttons, and standard side switches. make sure all equipment functions on the motorcycle are in normal condition.

plug in the alarm cable socket, press the open padlock button on the remote 1x and see if the motorcycle turn signal flashes 2x along with the sound of the alarm. If true then the alarm alignment and the yellow wire connection to the turn signal + right and turn signal + left are correct. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

press the closed padlock on the remote 1x, then turn the motorcycle key to the ON position, the alarm will sound and the right and left motorcycle lights will flash, then try to test whether it can be started manually, the engine should not start even though the electricity is on because the alarm is still in a locked state. to turn off the alarm, press the remote key image unlock 1x. This is the name of the anti-letter function T or it can be called anti-contact key.

turn on the machine manually, wait for a while until the machine starts in a normal and stable state and then you try to press the closed lock image button on the remote, if it turns off and can't be manually turned it means normal.

Thus posting this article about How to Install an Mp Two Way Withebird Motorcycle Alarm on a Yamaha All New Aerox Connected 155cc, hopefully it will be useful for all of us.

0 Response to "How to Install an Mp Two Way Withebird Motorcycle Alarm on a Yamaha All New Aerox Connected 155cc"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel